EIS SETTINGS


LIMITS:
cont = 2  (contrast)
light = 128  (backlight intensity)
interval = 30  (countdown timer)
max OP = 99
min OP = 50
max OT = 220
max RPM = 4900
min fuel = 
max AUX2 (SCP) = 12
max AUX3 (GBT) = 210
max AUX4 (FPr) = 38
min AUX4 (FPr) = 18
max AUX5 (amps) = 58
min AUX5 (amps) = 5
max H2O = 220
max volt = 15.6
min volt = 12.8
display = 1  (favorite display page)
set interval to 30


CONFIGURATION:

DISPLAY #1:
Tach	MAP	H2O
OT/OP	FPr	Volts

DISPLAY #2:
Tach	amps	OAT	GBT
OT/OP	Flow	Volts


AUX SETTINGS:
AUX1 = MAP	1SF = 446	1OFF = 66	+	D
AUX2 = SCP	2SF = 51	2OFF = 3	+	I
AUX3 = GBT	3SF = 135	3OFF = 11	-	I
AUX4 = FPr	4SF = 91	4OFF = 15	+	I
AUX5 = Amp	5SF = 186	5OFF = 357	+	I
AUX6 = unused	6SF = 100	6OFF = 0	+	I
+/- = tells whether each AUX port is proportional or inverse
D/I = tells whether each AUX port is an integer or has a decimal point
I = 3 display characters, D=4 char


OTHER SETTINGS:
Tach P/R = 2
FloCal = 200
FloBias = 0
AltCor = 128
Tim_RPM = 0   (engine speed to affect hour meter)


DISABLED PAGES:
3,4,6,7,8,11,15


USER PAGE CONFIGURATION:	(16 char/row)
1D1 = Tach
1P1 = 1
1D2 = Ax1 (MAP)
1P2 = 7
1D3 = H2O
1P3 = 14
1D4 = Off
1P4 = 14
1D5 = OT
1P5 = 17
1D6 = /
1P6 = 20
1D7 = OP
1P7 = 21
1D8 = Ax4 (FPr)
1P8 = 24
1D9 = Volt
1P9 = 29
1D10 = Off
1P10 = 0
1D11 = Off
1P11 = 0
1D12 = Off
1P12 = 0

2D1 = Tach
2P1 = 1
2D2 = Ax5 (amps)
2P2 = 6
2D3 = OAT
2P3 = 10
2D4 = Ax3 (GBT)
2P4 = 14
2D5 = OT
2P5 = 17
2D6 = /
2P6 = 20
2D7 = OP
2P7 = 21
2D8 = Flow
2P8 = 24
2D9 = Volt
2P9 = 29
2D10 = Off
2P10 = 0
2D11 = Off
2P11 = 0
2D12 = Off
2P12 = 0

GD/GP1-9 is for graphical leaning display, and not applicable to us
Peak=10 is for graphical leaning, and not applicable to us
don't forget to allow for FUEL LEVEL